Avenger Industrial Ginders and Polishers.
The Avenger Line of
all gear Grinders and Polishers use helical gears in an oil bath
just like the transmission in your car to produce high torque to
the floor with no noise and wear. This is the only planetary
grinder on the market that uses thrust bearings, just like in
the wheel of your car to reduce wear and give your a long
working life span. Larger models feature Siemens Motors and all
models feature American Electronics and controls for superior
performance.
One year Bumper to Bumper warranty. |
|
Avenger 460
The Avenger 460 is a great machine for smaller jobs or
homes, offices and rooms. Available in 110 volt or 220 volt single phase
The size and weight allow for easy loading and unloading at the jobsite
or to carry up to a mezzanine or landing. The Avenger 460 is very
versatile, and can be used for coatings removal, grinding and polishing.
The machine is a full three phase machine internally with variable speed
and forward and reverse, this also means that this machine is vastly
more reliable then the regular single phase machines from competitive sources.
Click on the Catalog above for more info and Spec's
|
 
|
|
Avenger 550
The Avenger 550 is a little larger then the base 460 with more Hp. The Avenger
550 is a Single Phase machine for better power sourcing, but you can
order it with Three Phase in any voltage power input, so you can use it at a home or small business location. Just plug it into a stove or dryer receptical
Just click on the Catalog above for more info and Spec's
|
Avenger 650
The Avenger 650 is the perfect mid size machine with huge capacity. The Avenger is a
Single or Three Phase machine for better reliablity, but you can order it with Single Phase 220 volt power input, so you can use it at a home or small business location. Just plug it into a stove or dryer receptical
Just click on the Catalog above for more info and Spec's
|
 |
 |
Avenger 750
The Avenger 750 is a very powerful machine with a lot of torque to the floor for the heavy grinds and for removing epoxy coatings and glue, a highly productive machine but easy to handle and operate. This is the ideal machine for larger jobs above 10,000 Sq Ft.
The machine comes with a the raise and lower feature and all the mounting hardware, all you need is diamond tools
Just click on the Catalog above for more info and spec's.
|
Avenger 880
The Avenger
880 is the perfect mid size machine with huge capacity. The Avenger is a
Three Phase machine for better reliablity, but you can order it with any
Three Phase voltage power input.
The ultimate in
high-performance surface preparation machining! The Avenger 800 class
grinder polisher provides power and effeciency without ever sacrificing
handling and ease of operation. |
 |
Vacuums
Because it is important to use a functional Hepa vacuum if you are going to grind dry, Levetec has a supply of
every type of vacuum you might need from low cost HEPA filter vacuums to
do the job, to the no holding back best vacuums you can buy.
|
 |
Metal Diamond Tools
To grind floors effectively it is necessary to use metal tools to grind down through the cap and leave a substrate that is ready to coat, seal or polish. Click on the picture to see the metal diamond tooling.
|
  |
Resin Diamond Tools
To bring a floor up to a high shine it is necessary to use
Resin tools to polish the substrate to the look you seek or to coat,
seal or polish. Click on the picture to see the Resin diamond tooling.
|
 |
Contact
Levetec
