Levetec Logo   Working
Ship til 6:00pm E.S.T.
Catalog | Shipping Policy | Warranty Policy | Financing | News | Home | Contact
Levetec Grinders Grinders & Polishers
Vacuum Machines Vacuum's
Floor Care Marble & Granite Care
Wood Floor Solutions Wood Floor Sanders
Scarifier Machines Scarifiers
Diamond Tools Diamond Tooling
Standup Edgers Standup Edgers
Grinding Cupwheels Grinding Wheels
Diamond Blades
Hand Tools
Sealers & Hardeners
Stains & Dyes
Coating & Glue Removal
Financing Equipment


Free Shipping


Contact Page at Levetec

Levetec's Avenger 650 Grinder/Polisher

Avenger 650   
The Avenger 650 is the perfect mid size machine with huge capacity. The Avenger is a Three Phase motor machine for better reliablity, but you can order it with Single Phase 220 volt power input, so you can use it at a home or small business location. Just plug it into a stove or dryer outlet, or if you want any other 3 phase voltage. International Voltages available.
Just click on the Catalog above for more info and Spec's

*  Variable Speed
*  All Gear drive
*  Extra weights available.



  Motor Three Phase IEC 10 Hp  
  Voltage 208-240 Volt Single Phase
  Weight   550Lb plus any Weights added
  Working Width 25 inches  
  Speed 300-1200 RPM on the grinding head
  Water Tank 6.6 gal (25 liters)  
  Abrasive Plates Three 8 5/8" grinding heads on rotating drum.  
All Gear Design

The 650 is all gear design with drive to each of the three flex heads as well as power to the drum for the highest production rate in its size.
Total Assembly   
Click picture to see inside planetary system.

Magnet Mount System
Magnetic Instant-Change Tool System.
The Avenger 650 comes with the Magnetic Instant-change tool mounting system. All you will need to purchase is the diamond tools you will need for your particular project. The system can mount scrapper tools ,regular metal trapezoid tools, and velcro mount tools.  
American Made Water and Dust Resistant Electronics

The Motor controller on all Avenger machines are indoor and outdoor rated for harsh environments with water and dust protection. You get maximum cooling when it is hot because the cooling fins are always open to the air not sealed in a cabinet, and no entry of dust into the electronics cavity. USA MADE  
Control Head
The Avenger 650 has all the features of much larger machines, such as forward and reverse directions on the grinding heads. This allows you to run directional tools such as scrapper tools to remove epoxy and glue. Most diamond tools do not have a direction so you can run those either way. The 460 also has variable speed to grind rough floors by slowing down the grinding heads to keep them from bouncing which will stop them from cutting. By speeding up the grinding heads you can polish and burnish the floor with the proper tooling. Variable speed also allows you to work on marble and granite floors.
Ratcheting Handle
You can instantly adjust the handle to be more comfortable, or to tip the machine over or to store the handle outr of the way.
One squeeze of the lever and move is to position.
Diacrete Metal Tools
sqf per hr                                       m² per hr
Concrete Grind 1 step
800-1100                                         80 -110
Terrazzo Grind 1 step
300-500                                           30 - 50
Glue Removal 1 step
800-1000                                         80 - 100
Paint Removal 1 step
800-1200                                         80 - 120
Marble Polishing 5 steps
200-400                                           20 - 40

* Production numbers may vary according to surface conditions, diamonds used, equipment operator, etc.
Because it is important to use a functional Hepa vacuum if you are going to grind dry, Levetec has a supply of low cost HEPA filter vacuums to do the job.
Filtration is an enormous issue when it comes to industrial vacuum cleaners. After all, if you take the time to vacuum an area, the last thing you want is the same material that you just vacuumed to be exhausted right back into the atmosphere. Depending on what you're collecting, the dust or debris may be hazardous to your product finish, or even your health. We, at Levetec, realize the importance of ultra-efficient filtration systems and put our guarantee on every industrial vacuum cleaner we sell.  
Metal Diamond Tools
To grind floors effectively it is necessary to use metal tools to grind down through the cap and leave a substrate that is ready to coat, seal or polish. Click on the picture to see the metal diamond tooling.
Diacrete Metal Tools
Resin Diamond Tools
To bring a  floor up to a high shine it is necessary to use Resin tools to polish the substrate to the look you seek or to coat, seal or polish. Click on the picture to see the Resin diamond tooling.
Resin Floor Polishing Disc


Contact Levetec for more information or a quotation.


Affordable Surface Preparation ...

web design brighton

Custom Web Site Design


Financing | Products | Contact | Home

Click to email Levetec